Sipes Latex Sealer 1800

Latex Sealer 1800 Is a High-Quality Sealer Made of Acrylic Copolymer.

Product Characteristics:

• High Penetration Into Surfaces and Good Adhesive Strength.
• High Resistance to Water and Alkalis.
• Good Preparation for Surfaces to Receive the Following Coats.
• Easy Application and High Spreading Rate.

Recommended Use: Suits Indoor Applications.
Type of Surface: Concrete, Cementitious, and Gypsum Surfaces...Etc.

Technical Specification:

• Final Appearance: Matt
• Viscosity: 105 ± 5 Kreps (at 25°C temperature and 50% humidity)
• Density: 1.36 ± 0.05 gm/cm3 (at 25°C temperature and 50% humidity)
• Solids by Volume: 34 ± 2%

Method of Application:

• Diluent: Water (20 – 25%)
• Application Tools: Roller, Brush, Sprayer

Surface Drying: 30 minutes (minimum)
Re-coating: 2 hours (minimum)
Recommended Coating System: All Surfaces (New and Old) Should Be Clean and Free from Dust, Oil, Fat, ...Etc.